Precision guide rail is a kind of high-precision instrument component, which plays an irreplaceable role in our factory production, but some problems will inevitably occur in the work, such as noise is a common one. It is a reminder to us of components, which means there are problems in some aspects. According to the industry experience and knowledge of our manufacturers for many years, when the guide rail is installed, due to the imprecise drilling, the guide rail has been slightly deformed when it is installed; in this way, if the operation goes on for a long time, it will be easy to generate noise, and if it is a little more serious, the guide rail slider will be damaged quickly; in addition, different lubricating grease will also cause A series of factors, such as the noise of the linear guide rail, will make the linear guide rail produce noise.

Understand the reason of the noise of the precision guide rail, then the solution only needs to suit the case, and deal with it according to certain scientific methods and rules

1. according to different equipment, adjust the pre pressure before use. In the dusty industry, use the linear guide to use dustproof device, this general manufacturer will have stock.

2. According to different models of linear guide rail, special oil for linear guide rail shall be selected;

3. Of course, in the use process, other reasons may be unavoidable, so as we accumulate more and more experience in the use, this method will certainly be more and more; if you have any problems in the use of linear guide rail, you can consult our Xianyang Fengning Machinery Co., Ltd., and we will serve you wholeheartedly.

4. Select the right type, check the dynamic load, think that selecting the large one is not to choose the small one, and avoid its light load and large guide rail, which will certainly increase the noise, motor overload operation, and shorten its life limit. It is recommended that the customer use the industrial calculator to select the type or ask the professional technical engineer before purchasing the type.

TSMC t-win is an independent R & D and production of linear guide rail, gear rack manufacturer, we have a professional R & D team, with a large number of production lines. TSW t-win Series Guide sliders and gear rack products have superior quality and high cost performance. Our company can provide a complete set of technical solutions. The linear guide rail produced by our factory has the following advantages.

① . fast movement speed, 480m per minute without holding beads.

② . small friction coefficient and low resistance, which can meet the requirements of high speed and low noise operation.

③ . large rated load, uniform stress and large overall load.

④ . high stability, high speed and stable movement.

⑤ . easy to install, can be directly installed on the base, easy to operate.

⑥ . the slider dust-proof design can be used for one or two layers of dust-proof, with good dust-proof effect and long service life.