Linear guides belong to precision components, so a cautious attitude is required when using them. Even if high-performance linear guides are used improperly, they cannot achieve the expected performance effect and are prone to damage. Therefore, when using linear guides, the following precautions should be taken:

Prevent rusting

When directly taking the linear guide rail by hand, it is necessary to thoroughly wash the sweat on the hands and apply high-quality mineral oil before operation. Especially pay attention to rust prevention during the rainy season and summer.

Keep the environment clean

Keep the linear guide rail and its surrounding environment clean, even if small invisible dust enters the guide rail, it will increase the wear, vibration, and noise of the guide rail.

Installation should be done carefully and carefully

Linear guide rails should be used and installed carefully, and strong stamping is not allowed. It is not allowed to directly hit the guide rails with a hammer, and pressure transmission through rolling elements is not allowed.

The installation tools should be suitable

Use appropriate and accurate installation tools for linear guides, and try to use specialized tools to avoid using fabrics and short fibers.