Precision linear guide rail, also known as line rail, slide rail, linear guide rail, or linear slide rail, is used in linear reciprocating motion scenarios. It has a higher rated load than linear bearings and can bear a certain amount of torque, achieving high-precision linear motion under high load conditions. So, how should precision linear guides be maintained? The manufacturer of precision linear guide rails has shared the following content, hoping to help everyone!

Maintenance steps for precision linear guide rails:

First, you need to remove the wheels and remember to put away the screws. If they fall off, it will be troublesome!

2. Remove the bearing again. Some wheels have very tight cores, making it difficult to remove the bearing. Use a hex wrench (the one that removes the screw) to forcefully dig it out. Don't worry, the bearing is not easy to break! But don't be too violent.

Then use a toothbrush to brush off the dirt on the surface of the penicillin. Some bearing side covers are detachable, while others are not. First, determine if you are Peilin and whether it is detachable.

How to make a judgment? Don't worry! If there is a C-shaped ring at the edge of the bearing side cover, it is detachable; if there is none, it is non detachable, but there are exceptions!

If it's detachable, it's very simple! Using a precision screwdriver, pry up the C-ring at the notch, and then remove the side cover. Just remove one side and it will be fine! The C-ring and side cover should be put away, and you may want to put them back after washing them later!

If it is non detachable, it would be more troublesome! We need to use destructive methods. Insert a precision screwdriver into the seam of the side cover and pry it up with force. Don't doubt it, that's it, but this side cover won't fit back! Well, throw it away! Remember, just dismantle one side and it will be destroyed!

Remove one side cover of all bearings and start washing! Pour some degreased oil into the bowl, throw the bearing down and stir it up. This way, the linear guide rail will be cleaned clean and tidy. It's simple.

The above is the relevant content about the maintenance of precision linear guides compiled by precision linear guide manufacturers for your reference only.