T-WIN PRECISION

The installation of linear guides requires special attention from operators, as any slight deviation may affect the quality and efficiency of mechanical processing. How to install it correctly? Please see the manufacturer's detailed introduction for you. 1: Before installing the linear guide rail, it is necessary to remove the burrs, dirt, and surface scratches on the mechanical installation surface. Attention: The straight slide rails are coated with rust proof oil before formal installation. Before installation, please clean the reference surface with cleaning oil. Usually, after removing the rust proof oil, the reference surface is more prone to rust. Therefore, it is recommended to apply lubricating oil with lower viscosity for the main shaft. 2: Gently place the main rail on the bed and use lateral fixing screws or other fixtures to gently fit the line rail with the lateral mounting surface. Attention: Before installation and use, it is necessary to confirm whether the screw holes

The straight guide rail of the stable precision machine has the advantages of fast running speed, less difficulty in catching beads, superior dust prevention effect of the slider, and high operating accuracy.

1. High guidance accuracy: Guidance accuracy refers to the straightness of the moving parts moving along the guide rail, as well as the accuracy of the relative positions between the base planes related to it. 2. Sufficient rigidity: The external forces acting on the moving parts are borne by the guide rail surface, so the guide rail should have sufficient rigidity. Therefore, we often increase the width of the guide rail surface to reduce the specific pressure of the guide rail surface, and set up auxiliary guide rails to withstand external loads. 3. Smooth and lightweight guide rail movement: When working with a linear guide rail, it should be lightweight and labor-saving, with a uniform speed, and there should be no crawling phenomenon at low speeds. 4. The structural craftsmanship of the guide rail is good: while ensuring other requirements of the guide rail, the guide rail structure should be simple, easy to process, measure, assemble, and adjust, in order to reduce costs. Specifi

Linear guides belong to precision components, so a cautious attitude is required when using them. Even if high-performance linear guides are used improperly, they cannot achieve the expected performance effect and are prone to damage. Therefore, when using a linear guide rail, the following precautions should be taken: to prevent rust. When directly taking the linear guide rail by hand, it is necessary to thoroughly wash off the sweat on the hands and apply high-quality mineral oil before operation. In the rainy season and summer, special attention should be paid to rust prevention. Keep the environment clean and keep the linear guide rail and its surrounding environment clean. Even small, invisible dust entering the guide rail can increase wear, vibration, and noise. The installation should be careful and careful. The linear guide rail should be used and installed carefully, and strong stamping is not allowed. It is not allowed to directly hit the guide rail with a hammer, and it is n

With the sustained and stable growth of the Chinese economy, China's manufacturing industry is also undergoing transformation and upgrading, providing a huge market space for linear guide rail products. Many well-known foreign guide rail manufacturers are optimistic about China's huge market and have come to invest and cooperate, which not only promotes the rapid development of the domestic guide rail industry, but also makes the world look up to China's manufacturing production capacity. At the same time, China's automobile and shipbuilding industry, urban rail transit, data communication, and power industry are continuously expanding their scale, and the demand for linear guide rails will also grow rapidly. There is huge development potential for the linear guide rail industry in the future!

The main reason for the noise produced by the rack and pinion is the collision, friction, and meshing of machinery. The sound produced by all relative applications can be called noise. If the noise is too loud, it is not a good phenomenon. An increase in noise will have a negative impact on people. We strive to control this sound. And greatly reduce the harm of noise. The meshing between the racks will produce sound, so now rack manufacturers will analyze the main factors that cause rack noise? Firstly, in terms of machining accuracy, we know that the more precise a part is, the better it can be used and reduce noise. Therefore, if the machining accuracy of gears and racks is relatively good, we will consider the problems that may occur during the installation process of racks. If the installation is not accurate, such as docking with racks

1. Firstly, it is necessary to confirm whether the lubricating oil used is suitable for special gear racks. Not all lubricating oils are good for gear racks, so it is necessary to choose the appropriate lubricating oil; 2. To avoid excessive lubricating oil accumulation and blockage, simply apply oil to the key parts of the rack. After oiling, it can reduce the wear and noise of the rack during operation; 3. Only a small amount of lubricating oil is needed to prevent rust in other positions of the special gear rack; 4. When oiling special gear racks, it is impossible to do so * *, so before finishing, wipe off the excess lubricating oil on the surface of the gear racks; 5. As for a variable speed car, it is equally important to pay attention to the rear variable speed pulley, gears, and flywheel. Using the same principles to maintain and lubricate these parts; 6. After lubricating the gear rack, use a dry cloth to wipe off the excess oil on the gear rack,

In the rack and pinion steering system, the accuracy and meshing degree of the steering rack are relatively important, and the steering system is an important assembly that determines the active safety of the car. Poor accuracy of the steering rack can cause insensitivity and unstable handling, requiring a significant rotation of the steering wheel, which not only affects the comfort of the car's operation, but can also lead to steering system malfunctions and accidents. The rack and pinion steering system is a commonly used steering mechanism in cars and small trucks, and the automotive steering rack is an important component of the rack and pinion steering system. Its working principle is simple. The rack and pinion gear set is wrapped in a metal tube, and each tooth end of the rack protrudes outside the metal tube and is connected together by a tie rod. A small gear is connected to the steering shaft, and when the car steering wheel is turned, the steering gear rotates, causing the